Effect of the dilation caused by helium bubbles on edge dislocation motion in α-iron: molecular dynamics simulation

Various types of nanometric defects such as voids and helium (He) bubbles produced by high-energy neutron irradiations are known to degrade the mechanical properties of irradiated materials. In this study, we have evaluated the obstacle strength of He bubbles to the mobility of an edge dislocation in α-iron for 2 and 4 nm bubbles with He-to-vacancy (He/V) ratios ranging from 0 to 1 at 300 and 500 K, by molecular dynamics simulation. Results showed that as the He/V ratio increases, the obstacle strength needed for the release of a dislocation from the bubble becomes stronger up to a moderate He/V ratio (0.6 and 0.4 for 2 and 4 nm bubbles, respectively, at both temperatures), and a further increase in the He/V ratio leads to weakening of the obstacle strength. For He/V = 1, the obstacle strengths are 10–30% weaker than those at moderate He/V ratios depending on the bubble size and temperature. The extent of obstacle strength was found to be correlated with the dilation caused by He bubbles depending on the bubble size, He/V ratio, and temperature.     

Visual image of neighbors to elicit wandering behavior in the soldier crab

The soldier crab appears in great numbers and feeds while wandering during daytime low tide. When they see an approaching object, they screw themselves into the sand. The mechanism of formation of mass wandering has not been clarified. In this study, to investigate if the soldier crabs use visual images of neighbors as a stimulus for wandering, dummy crabs were presented to crabs. In the experiments, one, two, four, or eight dummies were placed in a circle on a sand arena. Each crab was placed in the center of the arena and observed whether it burrowed into the sand or wandered. The proportions of wandering individuals in each experimental treatment were compared with the expected value. Significantly more crabs were wanderers when only two and four dummies were present. This result suggests that soldier crabs chose burrowing or wandering depending on visual image of the distribution of the neighbors.     

Methylcyclohexane dehydrogenation for hydrogen production via a bimodal catalytic membrane reactor

The dehydrogenation of methylcyclohexane (MCH) to toluene (TOL) for hydrogen production was theoretically and experimentally investigated in a bimodal catalytic membrane reactor (CMR), that combined Pt/Al₂O₃ catalysts with a hydrogen‐selective organosilica membrane prepared via sol‐gel processing using bis(triethoxysilyl) ethane (BTESE). Effects of operating conditions on the membrane reactor performance were systematically investigated, and the experimental results were in good agreement with those calculated by a simulation model with a fitted catalyst loading. With H₂ extraction from the reaction stream to the permeate stream, MCH conversion at 250°C was significantly increased beyond the equilibrium conversion of 0.44–0.86. Because of the high H₂ selectivity and permeance of BTESE‐derived membranes, a H₂ flow with purity higher than 99.8% was obtained in the permeate stream, and the H₂ recovery ratio reached 0.99 in a pressurized reactor. A system that combined the CMR with a fixed‐bed prereactor was proposed for MCH dehydrogenation. © 2015 American Institute of Chemical Engineers AIChE J, 61: 1628–1638, 2015     

Multiple uses of Essential Oil and By-Products from Various Parts of the Yakushima Native Cedar (Cryptomeria Japonica)

This article presents multiple potential uses of the Yakushima native cedar (Cryptomeria japonica), known in Japan as the Yaku-sugi tree. The Yaku-sugi was divided into four parts: leaves, branches with leaves, branches, and stems. We obtained the essential oil, hydrosol, distillation residue, and distillation wastewater from the trees. Essential oil and hydrosol were determined to be volatile organic compounds. All samples were screened for the following bioactivities: antioxidative, antibacterial, and anti-melanogenesis activities. Freeze-dried distillation residue was tested to assess whether it had a deodorizing effect. The main component of the leaf essential oil was found to be monoterpenes. In contrast, the stem essential oil mainly contained sesquiterpenes. In terms of bioactivities, the leaf essential oil showed antibacterial activity and the stem essential oil showed anti-melanogenesis activity. Distillation residue and wastewater showed many activities, including antioxidant, antibacterial, and anti-melanogenesis activities. Moreover, the residue had a deodorizing effect against ammonia.     

Classification and function prediction of proteins using data compression

Protein has a complicated spatial structure, and has chemical and physical functions which originate from this structure. It is important to predict the structure and function of proteins from a DNA sequence or amino acid sequence from the viewpoint of biology, medical science, protein engineering, etc. However, to data there is no way to predict them accurately from these sequences. Instead, some approaches attempt to estimate the functions based on an approximate similarity in the retrieval of sequences. We propose a new method for the similarity retrieval of an amino acid sequence based on the concept of homology retrieval using data compression. The introduction of compression by a dictionary technique enables us to describe the text data as ann-dimensional vector usingn dictionaries, which is generated by compressingn typical texts, and enables us to classify the proteins based on their similarity. We examined the effectiveness of our proposal using real genome data. This work was presented in part at the Sixth International Symposium on Artificial Life and Robotics, Tokyo, January 15–17, 2001     

A New CMC-AA Resin/Inorganic-gel Super Absorbent Material

A super absorbent material was prepared with the super absorbent resin （ SAR ） and inorganic gel. The SAR of the carboxymethyl cellulose grafting acrylic acid （ CMC-AA ） was copolymer synthesized using the method of inverse-phase suspension polymerization. The influences of the monomer concentration, neutralization degree, the initiator, dispersion agent, cross-linking agent, reaction and drying temperature on the grafting copolymer properties were examined. Meanwhlie, its properties was investigated and the model for absorption mechanism of this absorbent composite was proposed.     

Behavior of Buried Flexible Pipe under High Fills and Design Implications

The existing design guidelines for buried flexible pipes are limited to depth up to 10?m. The increasing use of difficult terrains for infrastructure, landfills, and residential and industrial developments has prompted installation of drainage pipelines under 20–30?m high fills. This paper presents the behavior of an instrumented flexible pipe buried under a 47.1?m deep fill. For filling above 20?m, the measured vertical stress above the pipe exhibited a concave distribution, corresponding to 90 and 110% of the average vertical pressure at the center and edges of the pipe, respectively. The measured results suggest that a triangular lateral pressure distribution can lead to overly conservative and uneconomical results for high fills while Spangler’s analysis is unconservative. Based on the measured results, a revised vertical and lateral earth pressure diagram was proposed for the design of flexible pipe under high fills >20?m. This paper proposes closed-form analyses for estimating the moments and displacements of the pipe subjected to high fill earth pressures. These closed-form solutions agree well with the measured pipe displacements and strains.